Description

Wood-minic subject matter with uncompromised printing high quality.

User Instructions
PolyWoodTMcontains no exact Picket (i.e. no longer a Picket polymer composite); it mimics the illusion of Picket by way of its stabilized foam construction. It’s also the primary three-D printable foam.
The elementary printing features are very similar to common PLA. Then again the most productive effects are steadily acquired with somewhat upper printing temperatures and decrease printing speeds in comparison to PLA.
It is really useful to print with a top retraction distance.
If the broadcast section shows bad layer adhesion, It’s endorsed to show off or scale back the ability of the section cooling fan throughout printing. PolyWoodTM cools so much quicker than common printing fabrics.
Specific tips for MakerBot Replicator 2 and 2X:
1. The maximum printing temperatures (with a layer top of 0.2 mm) are discovered to be 210 °C and 220 °C for Replicator 2 and 2X, respectively;
2. The printing velocity must be within the vary of 30 – 60 mm/s, with 30 mm/s being the most productive according to our effects.
3. It’s endorsed to disable the cooling fan (for Replicator 2) throughout printing.
4.For a layer top of 0.2 mm, It’s endorsed to set the “FeedstockMultiplier” price to 1 – 1.1 (default = 0.ninety three).

Technical Specifications
Average filament diameter – 1.75mm
Same old deviation of diameter – < ±zero.05 mm
Recommended printing temperatures – 210 ~ 220 °C
Recommended HBP (if supplied) temperature – 60 ~ 70 °C
Recommended printing velocity – 30mm/s

Reel Dimensions
Reel Diameter: 20 cm (7.87″)
Reel Width: 5.3 cm (2.09″)
Hub diameter:five.3 cm (2.09″)
Hub width:five.25 cm (2.07″)

Picket-minic subject matter with uncompromised printing high quality.
Picket-like printing subject matter that incorporates no exact Picket.
Minics Picket look from its foamed construction and colour (additionally the primary three-D printable foam subject matter).
Prints at prerequisites very similar to PLA.
Uncompromised printing high quality.