Description

Smartbuy 3D Printer Filament Features:

Manufactured to very tight tolerances (+/-0.05mm diameter) using the highest quality materials to ensure consistent feeding and stable prints.

Custom spool designed for strength, uniform performance and trouble-free feeding.

Filaments packaged in vacuum-sealed bag, with desiccant to prevent introduction of dust and moisture.

PLA (Polylactic Acid) filament for use with 3D printers – degradable bioplastic derived from plants.

Easier to print – less prone to warping than other filament materials.

Can be cut, filed or glued post printing.

Compatible with most commercially available non-cartridge based 3D printers.

For best performance, an melting temperature between 160~200 ‘C.

Environmentally friendly – guaranteed not to contain heavy metals.

Storage and Handling:

Keep material in sealed bag until ready for use.

Avoid Water. Keep in Dry Place. Keep Away from Heat.

Recommended Storage Temperature: -20 to 50 ‘C

Technical Specifications:

Weight: 1.0KG (2.2LB)

Diameter Tolerance: 1.75 ± 0.05 mm

Melting Temperature: 160~200 ‘C.

Baseboard Temperature: 0 ‘C

Specific Gravity: 1.24g/cm3.

Melt Flow Index: 6g/10min

Tensile Strength: 580kg/cm2

Tensile Elongation: 6%

Impact Strength: 1.6kg-cm/cm

Flexural Modulus: 37,000kg/cm2

Flexural Strength: 800kg/cm2

1 KG (approximately 2.20 lbs) Per Spool/Roll
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
Recommended Melting Temperature 160 ‘C – 200 ‘C and Baseboard Temperature 0 ‘C
Spool Diameter: 7.05″ – Spool Depth: 3″ – Hub Diameter: 2.9″ – Hub Hole Diameter: 1.45″