Description

100% virgin raw material

Consistent color throughout entire spool

Very clear, transparent and tough material

Not likely to shrink or warp, great between-layer bonding

Finish prints with glossy surface and unique flexibility

Recommended print temperature: 220 – 260°C (better with heated bed)

Use Instruction:

1. Open the bag, put the filament spool on the holder.

2. Find the free end of the 3d filament, remember not to loose the end in case of any crossing/tangling loops.

3. Set a printing temperature based on the filament material, press the extruding button and see if the melted filament extrudes smoothly. If the silky filament comes out evenly and easily, it means that it’s the right temperature; if there is “kaka” sound, it means that the temperature is not high enough and you need to increase the extruder temperature; if the extruding goes too easily while the surface is rough, it means that the temperature is too high and you need to lower the extruder temperature.

4. When the print temperature is set, you can choose the model, get sliced and start printing.

Filament Storage:

1. Please keep the filament at dry place and avoid direct sunlight or source of heat.

2. When finish using 3d filament, put the spool back into the sealed bag to avoid moisture.

3. When finish printing, place the free end of filament back to the spool hole in case of crossing/tangling loops.

Perfectly wound filament without tangles
1.75mm Filament Diameter (Tolerance: +/- 0.03mm)
Quality Certificate: ROHS, ISO9001
Recommended Print Temperature: 220 – 260°C (Better with Heated Bed)
Spool Diameter: 7.9″ – Spool Width: 2.6″ – Spool Inner Hub Diameter: 2.2″