M3 Stud Thermistor + cable Reprap 3D Printer Extruder E3D Hot End Prusa i3
$7.98 (as of October 8, 2017, 8:43 pm)
Based on EPCOS 100K Thermistor B57560G1104F.
Working temperature limit of 280C due to high temp. industrial epoxy resin used.
Connector type: JST 2 pin connector, 2.5mm spacing.
- Description
- Reviews (0)
Description
Easy to install Hex M3 Stud Thermistor features:
M3 stud threaded length is 3mm. This will allow to use shallower M3 threaded holes (such as on E3D heater block and clones).
Hex Body length: 6mm
Length of leads: 55mm
Package Contents
1 x Hex Thermistor based on NTC EPCOS B57560G1104F 100k Thermistor.
1 x JST Male connector with crimp-on pins.
1 x 1 meter long cable with JST connector on one side and dupont connectors (like for RAMPS) on other side.
Based on EPCOS 100K Thermistor B57560G1104F.
Working temperature limit of 280C due to high temp. industrial epoxy resin used.
Connector type: JST 2 pin connector, 2.5mm spacing.
1 meter long connection cable supplied















Reviews
There are no reviews yet.