Description

This THICK (3mil) Kapton tape sheet could be very robust and sturdy. It’s been exactly die-lower to the dimensions of 250x320mm (nine.eight”x12.6”), and completely suits Artifex, MendelMax 2 and different 3-D printers with huge print mattress. It can be lower into small items to paintings with smaller print surfaces with out leaving seams among tape stripes.

Got bored with the disturbing strategy of sparsely aligning tape stripes, or tearing skinny movie off the rolls of Kapton or PET tape? Do this THICK sheet, and you’re going to by no means return!

Specifications:

• Adhesion Kind: Silicone
• Size: 250 x 320 mm (nine.eight”x12.6”)
• Total Thickness: 0.08mm (3mil)
• Film Thickness: 0.05mm (2mil)
• Adhesive Thickness: 0.03mm (1mil)
• Temperature Resistance: 280C (536F)

Tips: Sooner than making use of the Kapton tape sheet, spray a skinny layer of Windex at the glass floor for simple removing of air bubbles via a squeegee or bank card.

Top quality Kapton (Polyimide) tape sheet 250x320mm (nine.eight”x12.6”)
Thick (zero.08mm, 3mil), robust and sturdy
Include liberate liner for simple liberate and install. Top temperature resistance as much as 280C (536F).
Supplies superb mattress adhesion for 3-D printing with ABS, PLA, PVA, Polycarbonate, and lots of different thermoplastics
Test all of the choices: 6”x6”x2.4mil (B00UIAG7V8), eight”x8”x2.4mil (B00UIAG970), 10”x10”x2.4mil (B00UIAGAJ2), eight”x11”x2.4mil (B00SP2ALK4), eight”x11”x3mil (B00SP2AMY4), 250mmx320mmx3mil (B00OU34PCM), 6”X100′ Roll (B00KHW0P7Y), 12”x100′ Roll (B00KHW0R8G).